Compatibility

VMZINC compatibility with other construction materials

Avoid all direct contact with fresh concrete, lime, asphalt, mortar and all supports and other construction materials capable of containing substances harmful to VMZINC.

  • Zinc in relation with timber

    A low or non-acid solid, natural and non treated timber deck, that is, with a pH of between 5 and 7 is compatible with zinc and can be used as a direct support.


Compatible timber Incompatible timber
Pine Larch
Spruce Oak
Scots pine Chestnut
Poplar Red cedar
  Douglas fir
  White cedar
  Plywood - see VMZINC PLUS

  • Zinc in relation with other metals

    Contact between zinc and other metals must take into account the electro-chemical reactions caused by a difference in electrical potential between the surfaces of the metals. Therefore a certain number of contacts are acceptable whilst others must be avoided.


    Various metals can be classified in accordance with their reactivity potentials, relative to the normal hydrogen electrode.

    If two metals are in contact, the metal with the higher potential in the electrochemical ranking decomposes the metal with the lower potential and, by accelerating corrosion, destroys it after a certain time.

    In practical terms, a certain number of bimetal contacts are acceptable while others must be avoided. This is particularly important when installing lightning protection. In addition, water must never be allowed to run from a higher potential metal to a lower one: the water can contain charged ions which would accelerate the removal rate of the weaker metal.


Compatible metals Incompatible metals
Lead Copper
Aluminium Steel (Non galvanised)
Galvanised Steel  
Stainless Steel  


Table of glues and mastics
Compatible products * Incompatible products *
Polyurethanes Acetic silicones
Non-acetic silicones Acid epoxides
MS Polymers Ureas / melanin / phenol-formaldehyde (wood or panel gluing)
  Acrylics (depending on the reagent used)

* always refer to the manufacturer's notice

 

Table of wood treatment products *
Type of treatment Components Compatibility with VMZINC * Class
Non-fixing metal salts Single component salts used in water (fluorine, boron or copper) NO C1
Metal fixing salts Complex metal salts containing chromium to fix the active metals (CCA, CCB) Study in progress (consult manufacturer) C1 to C5
Organic products Contain oil solvents YES C1 to C3
Emulsions Use water as a vehicle combined with non-hydrosoluble synthetic substances YES C1 to C2
Mixed products Combined metal compounds (copper and boron) with synthetic molecules To be determined (consult manufacturer) C1 to C4
Creosote Compound of active substances produced from hard coal distillation To be determined (consult manufacturer) C4

* always refer to the manufacturer's notice for product use